All current test results! Chamber + Membrane Airlifts!

All test results will be posted here.

All current test results! Chamber + Membrane Airlifts!

Postby Pssymon » Tue 05 Jul 2016, 4:06:48

Good day,

Here you will find all relevant test results as measured by Marc, Gino and Guyke.
All tests were done with Marc's quarantine pond test setup using an ultrasonic flow meter.
The flow was measured at the inlet to the collector (not in the Airlift) to prevent inconsistencies due to air bubbles in the flow.

I will post some pictures of the device used and the setup at Marc's place below the testresults.

Results:

Pressure chamber Airlift:

Pump------Diameter rising pipe--------Length rising pipe--------Litres per hour-------consumption-------watt/m³
SLL20----------------110---------------------------170---------------------15.000----------------9 watt------------0,6 watt
SLL20----------------110---------------------------145---------------------20.000---------------12 watt------------0,6 watt
SLL30----------------110---------------------------170---------------------22.000---------------17 watt------------0,7 watt
SLL40----------------110---------------------------170---------------------24.000---------------32 watt------------1,3 watt


Zenkoi membrane disk Airlift (24cm) with 250mm to 125mm reduction:

Pump------Diameter rising pipe--------Length rising pipe--------Litres per hour-------consumption-------watt/m³
SLL40----------------125---------------------------205----------------------24.000---------------28 watt---------1,16 watt
SLL50----------------125---------------------------205----------------------27.000---------------35 watt---------1,29 watt
ELS120--------------125---------------------------205----------------------42.000--------------107 watt---------2,54 watt


Membrane disk Airlift made by Gino (24cm disk) with 250mm to 160mm reduction:

Pump------Diameter rising pipe--------Length rising pipe--------Litres per hour--------consumption-------watt/m³
SLL40---------------160----------------------------175----------------------22.500----------------28 watt----------1,24 watt
SLL50---------------160----------------------------175----------------------25.000----------------35 watt-----------1,4 watt


Disk Airlift made by Guyke with 160mm to 110mm reduction:

Pump------Diameter rising pipe--------Length rising pipe--------Litres per hour-------consumption-------watt/m³
SLL30---------------110---------------------------155----------------------21.000----------------19 watt----------0,9 watt
SLL50---------------110---------------------------205----------------------23.000----------------36 watt---------1,56 watt
ELS 80-17----------110---------------------------205----------------------30.000----------------55 watt---------1,83 watt


Disk Airlift made by Guyke with 250mm to 110mm reduction:

Pump------Diameter rising pipe--------Length rising pipe--------Litres per hour-------consumption-------watt/m³
SLL50---------------110---------------------------205-----------------------23.000---------------40 watt---------1,73 watt
ELS80-17-----------110---------------------------205-----------------------35.000---------------66 watt---------1,88 watt

Thanks to Guyke for the original chart.


Pictures:

Ultrasonic Flowmeter
Image

Quarantine pond
Image

Image

Placing collector
Image

Image

Image

Finished setup
Image
User avatar
Pssymon
 
Posts: 120
Images: 17
Joined: Fri 11 Dec 2015, 0:12:51
Location: The Netherlands

Re: All current test results! Chamber + Membrane Airlifts!

Postby Pssymon » Tue 05 Jul 2016, 14:33:46

Videos for the most efficient tests:

9W 15.000 litres:
phpBB [video]



12W 20.000 litres:
phpBB [video]
User avatar
Pssymon
 
Posts: 120
Images: 17
Joined: Fri 11 Dec 2015, 0:12:51
Location: The Netherlands


Return to Test results

Who is online

Users browsing this forum: No registered users and 1 guest

cron